Menushopping cart
Tools for Working Wood
Invest in your craft. Invest in yourself.
CHECKOUT shopping cart Cart (-)

JOEL Joel's Blog

A Close Look at an Ultimatum Brace

08/20/2013

A Close Look at an Ultimatum Brace 4The brace in the picture is an ebony stuffed William Marples Ultimatum brace from between 1875 and 1876. Thanks to Reg Eaton's "The Ultimate Brace" book we can date the brace because this brace has both the "Hibernia" trademark (post 1875) and the missing "I" in William stamp ('pre-1876).
William Marples didn't invent the Ultimatum form of brace, that honor belongs to John Cartwright who received a patent in 1848 and then sold the rights to Marples who coined the "Ultimatum" name and became the largest seller of these types of brace by far. After the patent ran out many other makers made similar braces including the Joseph Marples Ltd. (no relation), the folks who currently make most of our gauges (but no braces). William Marples is the same company that eventually merged with Record, which was bought by Rubbermaid, and then in a notably successful effort to reduce quality, moved everything to China about 10 years ago.

A Close Look at an Ultimatum Brace 5In use Ultimatum braces suck when compared to an American ratcheting brace, and they were considerably more expensive than an all iron Scotch brace or a Spofford brace but the design pre-dates the American brace and Marples made them by the thousands in all grades of quality. Production of the Ultimatum brace seems to have petered out around 1900.

This brace, while well worn, is a joy to behold. Ebony, Bronze, how can you go wrong? The head is inlaid with horn, and the end stamp shows a lot of wear. What I really want you to take a look at is the overabundance of maker's marks. They must have used a giant stamp to deeply stamp "William Marples" and by 1875 the second "I" in William was missing and a leg of the second to last "R" has broken off. But what's really wild is that someone cared enough to make this luxurious Victorian stamp, which being so big is no small feat to make, and you need a big press to stamp it deep in the bronze, but they forgot to check if there was space on the brace for it. I know these days we would agonize of shaping the stamp to go AROUND the screw hole, not through.

A Close Look at an Ultimatum Brace 6Even Her Majesty, Queen Victoria, wasn't spared and the two "t"s in letters are cut off.

Look how elegantly the wood infill is blended with the bronze casting. At some point this brace was owned by an insecure chap named "G. Payne" who stamped his name (poorly) on every blank space he could find. But the real puzzle to me is what is probably an owner's stamp, but might be a retail store stamp that isn't a stamp but is a nicely done engraving.

A Close Look at an Ultimatum Brace 7P. Spanner" was probably the original owner of the brace and that the name is engraved in, not stamped, suggests two things: The brace might have been a gift or a presentation to him, or the tool represented such a large purchase that he felt he should trumpet his ownership. I didn't find any company with that name (didn't look very hard either) and I don't know any company that would engrave rather than stamp, so I don't think it's a store mark.

A Close Look at an Ultimatum Brace 8In any event for anyone who has the urge to leave their mark on their tools, you are in good company but I warn you - the standard for engraving is pretty high!

A Close Look at an Ultimatum Brace 9A Close Look at an Ultimatum Brace 10

Join the conversation
08/20/2013 John Walkowiak
Hi Joel, I have talked to English tool dealers Tony Murland and Reg Eaton about the multiple name stampings common on English tools. I was told that stamping one's name on your tools was required if one was to insure them. Today, some machinists and auto mechanics will use an electric engraver to mark their tools to make sure they return to the correct tool box.
08/20/2013 joel https://toolsforworkingwood.com
John,
Yes of course, I wrote about that in my book many years ago. But what I have never seen before - is a hand engraved owner's mark.
joel
08/20/2013 Jeremy http://jmawworks.blogspot.com
What if P. Spanner was an engraver by trade?
Engraving could make sense when a single use stamp would create more labor than saving, so marked by someone besides "P. Spanner" (who should have had his own stamp.)
While I've always thought this was a beautiful form, this post makes it look all NASCAR with it's abundance of marks.
08/20/2013 Charlie Buchanan
Or maybe it was owned by an engraver...It's a beauty!
08/20/2013 John Walkowiak
Joel, I have seen engraved owners names on other tools. If I have one I will send pictures of it.
Comments are closed.
The opinions expressed in this blog are those of the blog's author and guests and in no way reflect the views of Tools for Working Wood.
Subscribe
JOEL Joel's Blog
BEN Built-It Blog
BREN Video Roundup
EVT Classes & Events
WORK Work Magazine
Newer Entries...
JOELSappy all Over and Holdfasts & Saw Vises are Back In Stock - 10/23/2013
JOELWoodworking in America Is This Weekend! (and some last thoughts on Maker Faire) - 10/16/2013
JOELA Visit to the Kaufman Collection - Empire Furniture is Truly Hideous and Other News - 10/09/2013
JOELArchitectural Woodworking - A Wedding in the Mansion - 10/02/2013
JOELMaker Faire Was Maker Fabulous - 09/25/2013
JOELMaker Faire - Who, What, When, Where, & How - This Weekend! - 09/17/2013
JOELMy Disappointing Visit To The Renwick Gallery (and other news) - 09/10/2013
JOELPractical Sculpture - Chess Pieces in the Village - A Visit to the Chess Forum - 08/27/2013
JOELA Close Look at an Ultimatum Brace - 08/20/2013
JOELWhen Tomorrow Isn't Fast Enough - Same Day Delivery! - 08/13/2013
JOELArtisanal! - 08/06/2013
JOELPractically Woodworking - 07/23/2013
JOELThe Case Against An Adjustable Mouth On A Plane - 07/17/2013
JOELMakers, Making, and Maker Faire - Sept 21-22 2013 in NYC - 07/10/2013
JOELUtopian Benches - We Sit Together - 07/03/2013
JOELGallery Opening In Chelsea - Utopian Benches - We Sit Together - 06/27/2013
JOELGuest Blog: An Interesting Story - 06/26/2013
JOELFather's Day - Sell Your Dad a Knife - 06/12/2013
JOELSelling Bespoke Furniture in The Modern Age - 06/05/2013
JOELHandworks 2013 Followup, My New Backpack, and One Person Can Make a Big Difference - 05/30/2013
Older Entries...
Hours: M-F 9:00-5:00, closed Sat,Sun
Our Guarantee & Return Policy
Shipping and Sales Tax Info
Privacy Policy
Holiday Calendar 		Instagram Contact Us: Email: support@toolsforworkingwood.com
Phone: 800-426-4613 or 718-499-5877
Visit Us in Brooklyn: Directions to Our Showroom
© 1999-2019 toolsforworkingwood.com
Powered by 01 Inc. Coded entirely in NYC